Aura Heat Energy

• Elstein FSF series heaters can be used universally. Due to the low height of the elements, space-saving installation is possible. Compared to other heaters, the height of the FSF elements, measured from the radiating surface to the mounting plate, has been reduced by approx. 45 %.
• Elstein FSF panel heaters are ceramic infrared heaters with a low overall height. They are manufactured using a full ceramic casting process and are designed for operating temperatures of up to 750 °C and area outputs of up to 64 kW/m².
• Elstein FSF are available as standard in four designs with standard Elstein panel heater dimensions and cover the power range from 60 W to 1,000 W.

Standard Version

• Operating Voltage 230 V
• Ceramic Full-pour Casting
• Leads 85 Mm
• Elstein Standard Socket
• Mounting Set
• Ur/ul Certificate For Many Variants

• Special Wattages
• Special Voltages
• Extended Leads
• Power Leads With Ring Terminals

• The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.
• IR heating panels can be assembled using mounting sheets MBO.
• The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.
• Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.
• Subject to technical modifications of the products. Products can differ from illustration. Mounting and products dimensions in mm (metric).

Elstein HTS High Temperature Heaters are ceramic infrared panel heaters, which can be used for operating temperatures up to 900 °C and surface ratings up to 64 kW/ m².

 HTS series heaters are produced using a hollow-casting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated.

 Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.

 Compared with IR heaters, which are produced by using full-poured casting processes, HTS heaters have a considerably reduced heating-up time and, depending on the type of application, enable energy savings of up to 25 %.

 Elstein HTS high temperature heaters are available in four designs and cover the power range from 60 W to 1000 W.

 Application:
1.Thermoforming machines
2.VacuumForming Machines.
3.Printing INdustry
4.Pipe Socketing Machines
5.Paint Curing Ovens

• Elstein FSF series heaters can be used universally. Due to the low height of the elements, space-saving installation is possible. Compared to other heaters, the height of the FSF elements, measured from the radiating surface to the mounting plate, has been reduced by approx. 45 %.
• Elstein FSF panel heaters are ceramic infrared heaters with a low overall height. They are manufactured using a full ceramic casting process and are designed for operating temperatures of up to 750 °C and area outputs of up to 64 kW/m².
• Elstein FSF are available as standard in four designs with standard Elstein panel heater dimensions and cover the power range from 60 W to 1,000 W.

Standard Version

• Operating Voltage 230 V
• Ceramic Full-pour Casting
• Leads 85 Mm
• Elstein Standard Socket
• Mounting Set
• Ur/ul Certificate For Many Variants

• Special Wattages
• Special Voltages
• Extended Leads
• Power Leads With Ring Terminals

• The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.
• IR heating panels can be assembled using mounting sheets MBO.
• The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.
• Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.
• Subject to technical modifications of the products. Products can differ from illustration. Mounting and products dimensions in mm (metric).

Elstein Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against any damage. We supply Custom Wattage Infrared Ceramic Heaters as per the requirement of our clients.

Longer service life is achieved since the resistance of the heaters is made to remain constant over the whole temperature range. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high. This heater is available with Color Changing Feature as Yellow Ceramic IR Heater (CC FSR).

Elstein HTS Series High Temperature Heaters are ceramic infrared panel heaters, which can be used for operating temperatures up to 900 °C and surface ratings up to 64 kW/ m².

 HTS series heaters are produced using a hollow-casting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated.

 Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.

 Compared with IR heaters, which are produced by using full-poured casting processes, HTS heaters have a considerably reduced heating-up time and, depending on the type of application, enable energy savings of up to 25 %.

 Elstein HTS high temperature heaters are available in four designs and cover the power range from 60 W to 1000 W.

 Application:
1.Thermoforming machines
2.VacuumForming Machines.
3.Printing INdustry
4.Pipe Socketing Machines
5.Paint Curing Ovens